Choose a language
  • Gattoni Rubinetteria
  • Gattoni Rubinetteria
  • Hülsta-werke Hüls
  • ilide
  • misura emme s.p.a.
  • GROHE AG
  • BOFFI
  • WILKHAHN
  • FAP CERAMIQUE
  • NOKEN
  • PORCELANOSA
  • GAMADECOR
  • SYSTEM POOL

PUNKA C F

PUNKA C F
The PUNKA C seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of four elements: the first sheet plate is bent on 4 points with an angle of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides, thus creating the seat. The third element is placed on the seat through a foot 300 mm high, whilst through another foot, H. 750 mm, it is fixed on the ground. Furthermore, the third element contains a bin made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xh 690 mm. On the upper part with correspondence to a squared hole 250x250mm, 2 M4 bolts are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250 x 250x h20 mm. The fourth element is placed on the bin holder through a foot 300 mm high, whilst through another foot, H. 1425 mm, it is fixed on the ground. Furthermore, the fourth element contains a planter made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xh 1420 mm. On the upper part with correspondence to a squared hole 250x250mm, 2 M4 bolts are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250 x 250x h20 mm. Ground fixing is possible thanks to height holes with a 10 mm diameter. Maximum dimensions Hseat = 450 mm, Hbin = 750 mm, Hplanter = 1425 mm, Length = 2930 mm, Width = 500 mm, Width of the feet = 130 mm.
Request a quote
Request information
Where to buy this product