Choose a language
  • Gattoni Rubinetteria
  • Gattoni Rubinetteria
  • Hülsta-werke Hüls
  • ilide
  • misura emme s.p.a.
  • GROHE AG
  • BOFFI
  • WILKHAHN
  • FAP CERAMIQUE
  • NOKEN
  • PORCELANOSA
  • GAMADECOR
  • SYSTEM POOL

ROLL

ROLL
The structure of the ROLL bench consists of a steel EN10111DD11 sheet plate, T. 30/10, bent with a radius of 50 mm on the two long sides. Two steel EN10111DD11 fascias, T. 30/10, are welded to the heads which are bent on the extremities with a radius of 50 mm. On the upper part of the two fascias there is a hole, D. 10 mm, to fix 2 aluminium spheres, D. 65 mm. To the base of the bearing sheet plate 2 legs are welded with a distance of 1200 mm, and made of steel EN10111DD11 tube bar, 102x2 mm. These are provided with flange, D. 200 mm, with 4 holes, D. 10 mm, for ground fixing with appropriate bolts. On the upper sheet plate is placed a multilayer-marine exotic essence panel, T. 30 mm, whereas on both the extremities there are 2 caps of the same wood essence. Dimensions Length = 1800 mm, Width = 400 mm, H = 430 mm
Request a quote
Request information
Where to buy this product