Choose a language
  • Gattoni Rubinetteria
  • Gattoni Rubinetteria
  • Hülsta-werke Hüls
  • ilide
  • misura emme s.p.a.
  • GROHE AG
  • BOFFI
  • WILKHAHN
  • FAP CERAMIQUE
  • NOKEN
  • PORCELANOSA
  • GAMADECOR
  • SYSTEM POOL

PUNKA C

PUNKA C
The PUNKA C seat is made of galvanised and polyester powder coated steel EN10111DD1, T. 40/10. It consists of three elements: two of them are welded through a continuous wire welding and then polished, making the welding invisible. The first sheet plate is bent on 4 points with an angle of 90 degrees at 130 mm and 450 mm, while the second sheet plate is bent on the lower part of the first one and it has two folds of 21 degrees on the longer sides, thus creating the seat. The third element is placed on the seat through a foot 300 mm high, whilst though another foot, H. 750 mm, it is fixed on the ground. Furthermore, the third element contains a bin made of galvanised and polyester powder coated steel EN10346DX51D+Z or brushed stainless steel AISI 304, T. 10/10, dimensions 300x300xh 690 mm. On the upper part with correspondence to a squared hole 250x250mm, 2 bolts M4 are fixed to a frame in galvanised steel EN10346DX51D+Z, T. 10/10 and dimensions 250 x 250x h20 mm. Ground fixing is possible thanks to six holes with a 10 mm diameter. Maximum dimensions H seat = 450 mm, Hbin = 750 mm, Length = 2260 mm, Width = 500 mm Width of the feet 130 mm
Request a quote
Request information
Where to buy this product